Desk phones from Alcatel-Lucent, Avaya, Cisco, Mitel, Poly, Snom, Unify and Yealink work with RingCentral in 2026, plus the free RingCentral app on Windows, macOS, Android and iOS. You can buy a phone from RingCentral or bring your own SIP phone, and an analog adapter connects a fax machine or cordless handset.
RingCentral runs on standard SIP (Session Initiation Protocol) phones, and the ones RingCentral sells arrive ready to plug in. The practical question is not "will it ring" but "will it get firmware updates, presence lights and the company directory," and that depends on whether your model is on RingCentral's supported list and how it is set up.
The timing matters this fall. RingCentral has set an end-of-service date of September 30, 2026 for the Cisco SPA family, including the SPA504G and SPA525G, so offices still running those phones need a replacement plan now, according to RingCentral's end-of-life replacement table. Anyone choosing a new phone system, swapping an old PBX, or adding a second office is affected.
This article reflects RingCentral's published device rules as of October 2026 and covers the 2026 support lists. Rules change, so confirm current figures before you act.
- 📞 Which desk phone brands and models RingCentral lists as compatible, by name
- 📱 How the RingCentral app turns a computer, iPhone or Android phone into an extension
- 🔌 What assisted and manual provisioning mean and which features you lose with manual setup
- 📠 How fax machines and cordless handsets connect through an analog adapter or DECT base
- ⏰ Which phones stop connecting on September 30, 2026 and what RingCentral recommends instead
How RingCentral Phones Fit Together
Every device on a RingCentral account is either a desk phone, an app, or an adapter, and each one attaches to a license called a DigitalLine. RingCentral's help center says that to use a VoIP desk phone with its service, you can either purchase a phone from RingCentral or bring your own device, as explained on its compatible desk phones page. A phone bought from RingCentral is pre-configured and is often called plug-and-play. A phone you already own is a BYOD device and needs provisioning before it can register.
The app is the second leg. RingCentral's pricing page says the RingCentral app is compatible with Windows, MacOS, Android and iOS, and that during the free trial you can use any combination of RingCentral desk phones (up to 2 devices) and the app, per the RingEX plans page. In plain terms, a small office can test the whole service with two desk phones and everyone else on laptops and mobiles.
Adapters are the third leg. An analog telephone adapter (ATA) gives an old-style phone, fax machine or paging speaker an Ethernet port. RingCentral lists the Poly ATA 402 and Poly OBi 302 among its supported devices, and its fax guide says pairing an ATA with a DigitalLine lets you send and receive faxes by connecting your fax machine to the VoIP service, according to the ATA fax setup article. The consequence of skipping the adapter is simple: an analog device has no way to reach the network at all.
One licensing trap sits under all of this. RingCentral's pricing page says Mobile User extensions should not be used for making and receiving phone calls, and that they are charged like DigitalLines if used for calls in a month. If you plan to put someone on calls, give them a proper DigitalLine from the start rather than discovering the charge on the next invoice.
Which Situation Applies to You?
Your path depends on what you already own and whether you want RingCentral to manage the phones. The three branches below cover almost every reader who lands on this question.
If you have no phones yet, buy from RingCentral or rent. The end-of-life guide says you can rent or buy Avaya, Cisco, Mitel, Poly and Yealink devices through the Admin Portal, and that to rent devices you must have a RingEX multi-year contract, per RingCentral's end-of-life device guide. The pricing page repeats that phone rental is available only with a multi-year contract. Month-to-month customers buy outright or use the app instead.
If you own SIP phones from another provider, check the brand list first. RingCentral's BYOD overview says to make sure the device is unlocked before provisioning, to contact your previous provider to unlock it if needed, and to add a DigitalLine before configuring the phone via assisted provisioning, as set out in the BYOD setup overview. The overview names Yealink, Polycom and Cisco as brands set up through assisted provisioning; everything else goes through manual SIP settings.
If you own a phone that is not on any list, you can still try manual provisioning, but expect a basic experience. RingCentral's end-of-life FAQ says a device that is not on the replacement list can be registered as a BYOD phone by following the SIP manual provisioning instructions. The sections below spell out what you give up.
| Your starting point | What to do with RingCentral |
|---|---|
| Brand-new office, no phones | Buy or rent through the Admin Portal, or start everyone on the free app |
| Yealink, Poly or Cisco phones from an old provider | Unlock them, add a DigitalLine, use assisted provisioning |
| Mitel, Snom, Unify or Avaya phones from an old provider | Check the model on the brand's setup page, then assisted or manual provisioning |
| Cisco SPA phones still in use | Replace before September 30, 2026 |
| Fax machine or analog cordless phone | Add a supported ATA such as the Poly ATA 402 |
| Remote staff with laptops and smartphones | RingCentral app on Windows, macOS, Android or iOS |
Desk Phones RingCentral Lists as Compatible
RingCentral publishes setup guides for eight desk phone brands: Alcatel-Lucent, Avaya, Cisco, Mitel, Poly, Snom, Unify and Yealink. The models below are the ones with their own guide on RingCentral's compatible desk phones page; for other models from those brands, RingCentral points to its certified and supported deskphones list inside the support site.
| Brand | Models with a RingCentral setup guide |
|---|---|
| Alcatel-Lucent | M3, M5, M7 |
| Avaya | J139, J159, J169, J179, J189, J189A |
| Cisco | 6821, 7841, 8811, 8841, 8851, 8861, 9800 series |
| Mitel | 6863, 6865, 6867, 6869, 6873, 6905, 6910, 6920/6920W, 6930/6930W, 6940/6940W, 6970 |
| Poly | Edge E100, E220, E300, E320, E350, E450, E500, E550; CCX400, CCX500, CCX600, CCX700; VVX 101, 150, 201, 250, 301, 311, 350, 401, 411, 450, 500, 501, 600, 601; Trio 8300, 8500, 8800, C60 |
| Snom | D715, D717, D725, D735, D765, D785 |
| Unify | CP100, CP110, CP200, CP205, CP210, CP400, CP600, CP700, CP700X |
| Yealink | T41S, T42S, T43U, T46S, T46U, T48S, T48U, T57W, T73U, T73W, T74U, T74W, T77U |
Cisco Phones
Cisco's current line is supported, but its old SPA line is ending. The setup guides cover the Cisco 6821, 7841, the 8811/8841/8851/8861 family and the 9800 series. RingCentral's shared-lines article adds a limit you should know before you buy: the shared lines feature does not support Cisco phones, per the shared lines requirements page. A front desk that needs several phones answering one number should pick Avaya, Mitel, Poly or Yealink instead. The replacement table recommends the Cisco DP9841, DP9851, DP9861 and DP9871 for most SPA models.
Poly Phones
Poly has the longest list of RingCentral setup guides of any brand on the page, spanning the Edge E series, the CCX touchscreen line, the VVX line and the Trio conference phones. The shared-lines page confirms the CCX400 through CCX700, Edge E100 through E550 and VVX 250, 350 and 450 all support shared lines. Poly also makes the ATA 402 adapter and the Rove 20, 30 and 40 DECT handsets with Rove B1 and B2 bases that RingCentral lists, which makes it the one brand that covers desk, conference, cordless and analog from a single vendor.
Yealink Phones
Yealink's T4 and T7 series carry setup guides, and the shared-lines page extends support to the T33G, T34W, T53, T53W, T54W, T58W, T85W, T87W, the VP59 video phone and the AX83H and AX86R Wi-Fi handsets. Yealink cordless is where readers hit confusion. One Reddit user in r/RingCentral asked whether the newer W74 handset works and was told by RingCentral community support that the suggested DECT handsets are the W76P and W79P, or the W56H and W59R paired with a W70B base, in a thread on Yealink cordless handsets. Another commenter in that thread noted the W79P he bought from RingCentral arrived as a W59R handset with a W60B base, so the RingCentral part number is a bundle, not a single Yealink model.
Mitel, Avaya, Snom, Unify and Alcatel-Lucent
These brands are supported, but more of their models need manual setup. RingCentral's Mitel guide says some older Mitel phones lack necessary certificates, so they cannot connect using assisted provisioning, and that Mitel 6800 and 6900 series phones need SIP firmware 6.1.0.154 or later, per the Mitel BYOD provisioning article. Mitel 6900 phones may also need to be moved from MiNET firmware to SIP firmware first. Avaya J-series phones appear on both the setup list and the shared-lines list, so they are a safe pick for a reception desk. Snom, Unify and Alcatel-Lucent each have a short list of guided models; for anything else, the end-of-life FAQ's advice applies: register it as BYOD with manual SIP settings.
The RingCentral App on Computers and Mobiles
The RingCentral app is free and replaces a desk phone for anyone with a computer or smartphone. RingCentral's app gallery page lists the requirements as Windows 10 or above, Mac OS X 10.13 High Sierra or above, and availability on iOS and Android, per the RingCentral app page. The page also tells Mac users to check whether they have an Intel or Apple M1 chip before downloading. The pricing page's FAQ adds that the app is compatible with Windows, MacOS, Android and iOS, and that SMS is not available during the trial.
The consequence for budget is large. The end-of-life guide says that if you need to replace an end-of-service device, one option is to use the RingCentral app to make and receive calls, which it calls a free solution. An office that was about to spend on a dozen replacement handsets can instead give staff a headset and the desktop app and buy only the phones that truly need to sit on a desk.
One misconception trips up small offices: people assume a smartphone running the app needs a cheaper license. The pricing page says the opposite for Mobile User extensions, which are not meant for calls and get billed like DigitalLines if used for calls in a month. A user who makes calls on the app needs a DigitalLine, whether the app runs on a laptop or a phone. The next step is to count calling users first and app-only, message-only users second, so the license mix is right from day one.
Assisted Versus Manual Provisioning
Provisioning is the step that turns a generic SIP phone into a RingCentral extension, and the method decides which features you get. Assisted provisioning means you enter the phone's brand and MAC address in the Admin Portal, and RingCentral's servers push the configuration and firmware to the phone. The BYOD overview says assisted provisioning is used for Yealink, Polycom and Cisco phones and that you must add a DigitalLine first.
Manual provisioning means you type RingCentral's SIP settings into the phone's own web page. The Mitel guide lists what manually provisioned devices lose: they cannot receive automatic updates from RingCentral's servers, cannot receive RingCentral firmware updates, cannot use the Presence feature, do not support the corporate directory, and have no softkeys for Paging or Intercom. What still works includes incoming and outgoing calls, caller ID, hold, transfer, three-party local conference, voicemail playback without a message-waiting light, and call park, flip and forwarding through DTMF codes.
The SIP values themselves are published. The Mitel guide gives the proxy server as sip.ringcentral.com on port 5060, the outbound proxy as sip10.ringcentral.com on port 5090, and the registrar as sip.ringcentral.com on port 5060, with the username, password and authorization ID taken from each DigitalLine's SIP settings in the account. The default admin password on a Mitel handset is 22222, and the guide says to factory reset the phone before you start.
| Feature after setup | Assisted provisioning | Manual provisioning |
|---|---|---|
| Calls, hold, transfer, voicemail | Yes | Yes |
| RingCentral firmware updates | Yes | No |
| Presence lights for coworkers | Yes | No |
| Company directory on the phone | Yes | No |
| Paging and Intercom softkeys | Yes | No |
| Message-waiting light | Yes | No |
Firmware is the hidden snag for used phones. One Reddit user in r/VOIP bought refurbished Yealink T48U phones that shipped on firmware version 108.87 and found RingCentral's build was on the older .86 branch; the phones entered a firmware update loop and failed to provision, as described in the T48U downgrade thread. Other commenters said Yealink confirmed downgrading is not possible past a certain release. The lesson is to check the shipped firmware before buying used stock, or buy from RingCentral so the firmware matches.
Fax Machines, Cordless Handsets and Analog Devices
Analog devices connect through an ATA, and cordless handsets connect through a DECT base, and both need a DigitalLine. RingCentral's fax guide says it uses the T.38 standard for fax, that T.38 is not guaranteed for every end-to-end connection, and that you should test an ATA's speed, quality and reliability before you commit. The guide lists the setup order: purchase an ATA, create an extension for the fax machine, configure the extension's call forwarding, set up an ATA fax number, then connect the ATA to the fax machine.
The supported adapters on RingCentral's device page are the Poly ATA 402 and Poly OBi 302. The end-of-life table names the Poly ATA 402 as the recommended replacement for the Cisco SPA122, SPA2102, SPA3102 and PAP2T adapters that reach end of service on September 30, 2026. A medical or legal office that still faxes should order the replacement adapter before that date rather than after the old one stops registering.
Cordless options are broader than many readers expect. RingCentral's device page lists the Poly Rove 20, 30 and 40 handsets with Rove B1 and B2 bases, the Yealink W60P, the Snom M500 base station and the Unify OpenScape Cordless IP V2. The shared-lines page adds Yealink's W76P and W79P DECT bundles and the AX83H and AX86R Wi-Fi handsets. A warehouse that needs roaming coverage can mix a DECT base for the floor with Wi-Fi handsets where access points already exist.
Phones Reaching End of Service in 2026
Cisco SPA phones and adapters stop connecting to RingCentral on September 30, 2026. The replacement table lists the SPA122, SPA301, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA514G, SPA525G, SPA921, SPA941, SPA942, SPA962, the SPA2102 and SPA3102 adapters and the PAP2T, all with the same end-of-service date. For each model it names a Cisco replacement, such as the DP9841 for the SPA504G, and a Yealink alternative, such as the T74U or T77U.
The end-of-life guide explains what happens at the deadline: phones registered before the security certificate expires keep their connection, but if the phone is reset or unplugged, it will not reconnect. If the connection drops, the device has to be re-configured as a BYOD phone through SIP manual provisioning, which means losing firmware updates and presence. An office that ignores the date may limp along until the next power outage, then lose every SPA phone at once.
RingCentral lists vendor offers tied to the switch. The guide says Yealink offers a 10 percent discount off list price on all models, and that buying five or more qualifying Poly phones earns up to $75 per unit through the HP Poly Phone Cashback program. To find affected devices, the guide points admins to the Admin Portal under Phone System, then Phones & Devices, then User Phones, where a filter shows end-of-life models.
A Worked Replacement Example
An eight-phone office can offset a share of its replacement cost with the Poly cashback. Suppose a dental practice has eight Cisco SPA504G phones and chooses to replace them with qualifying Poly Edge E-series phones bought through RingCentral. The cashback program pays up to $75 per unit when you buy five or more qualifying Poly phones, and eight is more than five, so every unit qualifies. The maximum cashback is 8 × $75 = $600. If the practice instead bought only four phones and put the other four staff on the free app, four is below the five-unit floor, so the cashback would be $0, and the savings would come from the four handsets not purchased. The practice should price both routes before ordering.
Three Readers, Three Phone Choices
Maria, a receptionist at a two-doctor clinic, needs three phones to ring on one number. Shared lines do not work on Cisco phones, so she picks a Yealink phone instead. Her fax machine gets a Poly ATA 402, and she tests a few faxes first because T.38 is not guaranteed on every connection.
Devon, an IT manager with 30 users across two sites, wants to reuse Yealink phones from an old provider. One Reddit user in r/sysadmin described the same situation, 30 users in two locations weighing RingCentral against a local provider, in a thread on mixing soft and hard phones. Devon's steps follow RingCentral's BYOD overview: get the old provider to unlock each phone, add a DigitalLine per user, then run assisted provisioning for the Yealink handsets. Staff who travel use the app on Windows laptops running Windows 10 or later.
Priya runs a four-person design studio and wants no desk phones at all. Everyone uses the RingCentral app on a MacBook and an iPhone. She checks each Mac's chip under About This Mac, as the app page advises, and gives all four people DigitalLines because they make and take calls. During the trial she can test with no hardware, so there is nothing to return within the 21-day hardware window.
Mistakes to Avoid
Most RingCentral phone problems come from skipping one of the checks below. Each mistake has a cost in money or lost features.
- Buying used phones without checking firmware. Phones shipped on a newer branch than RingCentral's build can loop on updates and never register, as the r/VOIP T48U owner found.
- Choosing Cisco phones for a shared-line front desk. Shared lines do not support Cisco phones, so the calls will not ring across the group.
- Leaving Cisco SPA phones in service past September 30, 2026. They stop reconnecting after any reset or power loss.
- Putting call-heavy staff on Mobile User extensions. RingCentral bills those like DigitalLines when they are used for calls in a month.
- Skipping the unlock step. A phone still locked to the old provider will not accept RingCentral's configuration, so contact the old provider to unlock it.
- Forgetting to add the DigitalLine before assisted provisioning. The Admin Portal needs a line to attach the device to.
- Assuming an ATA fax will behave like a landline fax. T.38 is not guaranteed end to end, so an untested adapter can fail.
- Keeping trial hardware past the return window. Hardware must go back within 21 days of trial cancellation to avoid charges.
Do's and Don'ts
Do these before you order a single handset.
- Do match each model against RingCentral's compatible desk phones page, because that is where the setup guide lives.
- Do add a DigitalLine for every user who makes or takes calls, because that is the license a phone or app registers against.
- Do factory reset a Mitel BYOD phone first, because the Mitel guide requires it before manual provisioning.
- Do test fax quality on the ATA before cutting over, because RingCentral says T.38 is not guaranteed.
- Do filter User Phones in the Admin Portal for end-of-life models, because that filter shows which ones stop on September 30, 2026.
Don't make these assumptions.
- Don't assume a SIP phone from an unlisted brand will get presence or directory, because manual provisioning drops both.
- Don't plan to rent phones on a month-to-month plan, because rental requires a multi-year contract.
- Don't buy cordless gear by Yealink's model name alone, because RingCentral part numbers such as W79P are bundles of a base and a handset.
- Don't use more than two desk phones during the trial, because the trial allows up to 2 devices.
- Don't wait for a reboot to reveal an end-of-service phone, because it will not reconnect after that.
Pros and Cons of Bringing Your Own Phones
BYOD saves hardware spending but shifts the setup work and some risk to you.
Pros:
- No new hardware cost if your Yealink, Poly or Cisco phones are already on the supported list.
- Assisted provisioning still delivers firmware updates and presence for those three brands.
- Manual SIP settings are published, so even unlisted phones can make and take calls.
- The free app covers staff who do not need a desk phone, which lowers the number of BYOD phones to configure.
- You can mix BYOD desk phones with RingCentral-bought phones on one account.
Cons:
- Phones must be unlocked before provisioning, which may mean contacting the old provider.
- Used phones may arrive on firmware RingCentral does not support, with no way to downgrade.
- Manually provisioned phones lose updates, presence, directory, paging and intercom softkeys.
- Older Mitel phones may need firmware 6.1.0.154 or a MiNET-to-SIP conversion before they connect.
- Unlisted phones are outside RingCentral's setup guides, so troubleshooting falls on you.
What to Do Next
- Sign in to the Admin Portal, open Phone System, then Phones & Devices, then User Phones, and filter for end-of-life models.
- List every phone you own by brand and model and check each against RingCentral's compatible desk phones page.
- Decide who needs a desk phone and who can use the free app on Windows 10 or later, macOS 10.13 or later, iOS or Android.
- Add a DigitalLine for every calling user, including app-only users who make calls.
- For BYOD phones, ask the old provider to unlock them, factory reset them, and run assisted provisioning for Yealink, Poly and Cisco or manual SIP setup for others.
- Replace Cisco SPA phones and adapters before September 30, 2026, using the recommended Cisco, Yealink or Poly ATA 402 models.
- For fax, order a supported ATA, follow RingCentral's five-step fax setup order, and test before you rely on it.
- If you are on a trial, keep to two desk phones and return any trial hardware within 21 days of cancellation.
Frequently Asked Questions
Can I Use Any SIP Phone With RingCentral?
Yes, in most cases. Any unlocked SIP phone can be registered through manual SIP provisioning, but only listed brands and models get assisted provisioning with firmware updates, presence and the company directory. Unlisted phones get calls, hold, transfer and voicemail without a message-waiting light.
Which Phone Brands Does RingCentral Support?
Alcatel-Lucent, Avaya, Cisco, Mitel, Poly, Snom, Unify and Yealink are the brands with RingCentral setup guides in 2026. Yealink, Poly and Cisco phones use assisted provisioning; the other brands are set up through their guided models or manual SIP settings.
Do Cisco Phones Work With RingCentral?
Yes, the Cisco 6821, 7841, 8811, 8841, 8851, 8861 and 9800 series have setup guides. Cisco phones do not support RingCentral's shared lines feature, and the Cisco SPA family reaches end of service on September 30, 2026.
Can I Use My iPhone or Android Phone With RingCentral?
Yes, through the free RingCentral app, which is available on iOS and Android as well as Windows and macOS. A user who makes or receives calls on the app needs a DigitalLine, because Mobile User extensions are not meant for calling.
Does RingCentral Work With Yealink Cordless Phones?
Yes, RingCentral lists the Yealink W60P, and its shared-lines page adds the W76P and W79P DECT bundles and the AX83H and AX86R Wi-Fi handsets. Community support told one Reddit user the W76P, W79P, or W56H and W59R with a W70B base are the suggested DECT choices.
Can I Connect a Fax Machine to RingCentral?
Yes, through a supported analog telephone adapter such as the Poly ATA 402 paired with a DigitalLine. RingCentral uses the T.38 fax standard, says it is not guaranteed on every connection, and advises testing speed and reliability before you choose an adapter.
What Is a DigitalLine on RingCentral?
A DigitalLine is the license a desk phone, app or adapter registers against. You must add one before assisted provisioning, each line in a shared-line group needs one, and an ATA for fax is paired with one.
What Happens to Cisco SPA Phones After September 30, 2026?
They stop connecting to the RingCentral network. Phones registered before the certificate expires keep working until they are reset or unplugged, then will not reconnect. RingCentral recommends the Cisco DP9841 through DP9871, or the Poly ATA 402 for adapters.
Can I Rent Phones From RingCentral?
Yes, but only with a RingEX multi-year contract. Avaya, Cisco, Mitel, Poly and Yealink devices can be rented or bought through the Admin Portal.
How Many Phones Can I Use During the RingCentral Free Trial?
Up to 2 desk phones, plus the RingCentral app. Any trial hardware must be returned within 21 days of trial cancellation to avoid hardware charges.
Will My Old Mitel Phones Work With RingCentral?
Many will, with conditions. Mitel 6800 and 6900 series phones need SIP firmware 6.1.0.154 or later, and some 6900 phones must first move from MiNET to SIP firmware. Older Mitel models without the needed certificates can only be set up manually.
What Features Do I Lose With Manual Provisioning?
Firmware updates, presence, the corporate directory, paging and intercom softkeys, and the message-waiting light. Calls, caller ID, hold, transfer, three-party conference, voicemail playback and DTMF-code call park, flip and forwarding still work.