Office Consumer is reader-supported. We may earn an affiliate commission from qualified links on our site.

Top 5 USB-C Hubs for Dual Monitors in 2026 + FAQs

As an Amazon Associate, Office Consumer earns from qualifying purchases.

The CalDigit TS4 is the top pick for running two monitors from one cable, because its three Thunderbolt 4 ports drive dual displays on both Windows laptops and Pro or Max MacBooks, backed by owners who call it rock solid after years of use; the Plugable UD-MSTH2 is the lean pick for Windows and Chromebook users who just want two HDMI screens and 65W of charging; and anyone who needs a DisplayLink dock rather than a Thunderbolt or MST dock should look only at the Anker 563.

ProductTotal portsPower passthroughHDMI outputEthernetSD card readerUSB data speedCable lengthBuy
CalDigit TS47.5W (5V/1.5A)98 W–Ethernet–10Gb/s–Check price on Amazon
Ugreen Revodok Max 21313180 W–Ethernet–40 Gbps–Check price on Amazon
Plugable UD-MSTH2–65 WHDMI 2.0––10Gbps1.0m/3.28ft inCheck price on Amazon
Anker Anker 563 USB-C Hub (10-in-1)10100 WHDMI 2.0––5Gbps–Check price on Amazon
Anker Anker 565 (11-in-1)–85 W–Ethernet–10 Gb/s–Check price on Amazon

CalDigit TS4: The Dock That Owners Keep for Years

CalDigit TS4

  • Total ports: 7.5W (5V/1.5A)
  • Power passthrough: 98 W
  • Ethernet: Ethernet
  • USB data speed: 10Gb/s

Best for: Laptop users wanting 98W pass-through charging, an SD card reader and wired Ethernet.

Skip if: Anyone needing a confirmed HDMI output, since none is listed in the specs.

Check price on Amazon

If you carry a 14-inch or 16-inch MacBook Pro between home and the office and want to drop onto two 1440p or 4K monitors with one cable, the TS4 is the pick built for that exact routine. It is a Thunderbolt 4 dock, which means the single cable to your laptop carries 40Gb/s of data, and the dock splits that into video, Ethernet, USB and power. CalDigit's own page confirms dual displays on Pro, Max and Ultra Apple chips, on Intel Macs, and on Windows Thunderbolt 3 and 4 laptops, at up to 4K 60Hz on each screen for most hosts, and up to 6K 60Hz on M1 Pro and Max machines with DSC, all on the TS4 product page.

Two specs decide this pick. The first is 98W of laptop charging, which keeps a laptop powered over the same single cable. The second is the port count: 18 ports in all, including three Thunderbolt 4 ports, eight USB ports that all run at 10Gb/s and 2.5 Gigabit Ethernet.

Owners back up the reliability claim. One X user who runs an M3 MacBook with the TS4 said it feeds Ethernet, several USB-C devices and two 1440p monitors at 165Hz over one cable and has been absolutely rock solid. One Reddit user in r/LinusTechTips explained why a Thunderbolt dock mattered to them: with their old HP dock they had to unplug a cable every time they switched between Windows and Mac. Another in r/CalDigit noted their older TS3 is still running after four years and described the line as built like a tank.

The honest downside is that no HDMI output is listed in the TS4's specs. If both of your monitors only have HDMI inputs, you will need adapters, which adds cost and more things that can fail. A Reddit reply in the same r/LinusTechTips thread reminded a buyer that the warranty clock runs from the original purchase date, not from a replacement, so register it when it arrives.

Against the Ugreen Revodok Max 213, the TS4 charges a laptop at 98W against the Ugreen's 90W and runs all eight USB ports at 10Gb/s, while the Ugreen ships with a bigger 180W charger and has 13 ports. Pick the TS4 if you own a 10Gb/s SSD, a card reader workflow or a 2.5GbE network.

Skip It If: both monitors are HDMI-only and you do not want to buy adapters, since no HDMI output is listed in the TS4's specs.

Ugreen Revodok Max 213: The Most Charging Power on the List

Ugreen Revodok Max 213

  • Total ports: 13
  • Power passthrough: 180 W
  • Ethernet: Ethernet
  • USB data speed: 40 Gbps

Best for: Power users wanting 13 ports, 40 Gbps data, Ethernet and 180W power passthrough.

Skip if: Skip if you want a simple minimal hub; this is a big 13-port dock.

Check price on Amazon

If your laptop is a power-hungry Windows workstation or a MacBook Pro with the Max chip, and you also want two high-refresh screens, the Revodok Max 213 ships with a 180W charger and pushes up to 90W to the laptop while the rest feeds the dock's 13 ports. It is a Thunderbolt 4 dock like the TS4, and Ugreen's page confirms dual 4K@60Hz or a single 8K display on the Revodok Max 213 page.

The deciding spec for a dual-monitor desk is the video path. The second useful feature is the Gigabit Ethernet port, for wired networking at the desk. Data moves at 40 Gbps over Thunderbolt, so drives and monitors share plenty of bandwidth on the one cable.

Long-term owners report it does the job with one caveat. One Reddit user in r/UsbCHardware has run the Revodok Max 213 with MacBook Pros and two monitors for about two years and said it has been fine apart from an Ethernet DHCP problem where their Mac would not pick up an address through the dock's port. That is worth testing on day one if wired networking is the reason you are buying. One X user who had just unboxed theirs liked the dock overall but found the front USB-C and headphone jacks misaligned with the housing and asked Ugreen for a replacement, which points to checking the front ports as soon as it arrives.

The honest downside is bulk: this is a big 13-port dock with an external power brick, so it is a permanent desk fixture. Like the TS4, no HDMI output is listed in its specs, so HDMI-only monitors may need adapters.

Against the TS4, the Revodok Max 213 ships with a bigger 180W charger, while the TS4 delivers more to the laptop at 98W against 90W and runs 10Gb/s on every USB port. Against the Plugable UD-MSTH2, the Ugreen gives you 40 Gbps Thunderbolt data and a bundled 180W charger where the Plugable stops at 10Gbps and 65W, but the Plugable has a confirmed HDMI 2.0 output for plain HDMI monitors. Pick the Ugreen if you run two demanding monitors or a laptop that needs more than 65W; pick the TS4 if you move a lot of data over USB.

Skip It If: you have a small desk or a laptop that charges at 65W or less, since you would be paying for 180W of charging and a big 13-port dock you do not need, or if you rely on the dock's Ethernet port with a Mac and cannot test it before your return window closes.

Plugable UD-MSTH2: Two HDMI Screens for Windows Laptops

Plugable UD-MSTH2

  • Power passthrough: 65 W
  • HDMI output: HDMI 2.0
  • USB data speed: 10Gbps
  • Cable length: 1.0m/3.28ft in

Best for: Laptop users wanting wired Ethernet, HDMI 2.0 video and 65W pass-through charging.

Skip if: Skip if you need pass-through power above 65W or speeds beyond 10Gbps.

Check price on Amazon

If you have a Windows 10 or 11 laptop, a Chromebook or a work-issued ThinkPad or Latitude with a full-featured USB-C port, and two ordinary HDMI monitors, the UD-MSTH2 is the simplest way to get both screens working without drivers. It has an HDMI 2.0 output and is driverless, as described on the UD-MSTH2 product page.

Two numbers decide whether it fits you. First, 65W of laptop charging, which will not suit a laptop that needs more pass-through power than that.

The honest downside is the ceiling on every spec. Pass-through power is capped at 65W, USB data is capped at 10Gbps, and the included host cable is 1.0m/3.28ft, so the dock has to sit close to the laptop. Plugable backs the dock with lifetime technical support, which is the safety net to lean on if setup goes wrong.

Against the Anker 563, the UD-MSTH2 needs no driver and moves USB data at 10Gbps, while the Anker 563 uses DisplayLink and charges at up to 100W. Against the Ugreen Revodok Max 213, the Plugable is the simpler desk dock with a confirmed HDMI 2.0 output, while the Ugreen brings 40 Gbps Thunderbolt, 13 ports and a 180W charger for people who need all of that. Pick the Plugable if you want the cleanest driverless setup; pick the Anker 563 if you want DisplayLink and up to 100W of charging.

Skip It If: your laptop draws more than 65W and you do not want to keep its own charger on the desk, or you need USB speeds beyond 10Gbps.

Anker 563 USB-C Docking Station (10-in-1): Two Screens on a Base-Chip Mac

Anker Anker 563 USB-C Hub (10-in-1)

  • Total ports: 10
  • Power passthrough: 100 W
  • HDMI output: HDMI 2.0
  • USB data speed: 5Gbps

Skip if: Anyone moving large files often, since USB data is capped at 5Gbps.

Check price on Amazon

If you have a MacBook Air with the base chip, the Anker 563 is the one DisplayLink pick here. It uses DisplayLink, and Anker's page says it can connect your laptop with up to 3 monitors, on the Anker 563 page.

The deciding spec is what the two screens actually get. The HDMI output is HDMI 2.0, and the dock has 10 ports in total. For spreadsheets, email and video calls that is fine. Charging is up to 100W dynamic power into the laptop, and the host still needs Power Delivery and DisplayPort Alt Mode support on its USB-C port.

The honest downside is twofold. USB data is capped at 5Gbps on the USB-A 3.1 port, so an external SSD will run at a fraction of what the TS4 or Ugreen allow. The second limit is HDCP: Anker notes that the 2K HDMI port and the DisplayPort do not support HDCP, so paid Netflix or YouTube content may go black on those screens. DisplayLink also means a driver to install and keep updated after each macOS release, and Anker's own FAQ already covers display issues with the 2K DisplayPort on macOS 13.

Against the Plugable UD-MSTH2, the Anker 563 uses DisplayLink but gives slower 5Gbps USB, while the Plugable gives 10Gbps USB with no driver. Pick the Anker 563 if a base-chip Mac is your work machine; pick the Plugable if you never touch a Mac.

Skip It If: you move large files over USB every day, you watch protected streaming content on your second screen, or you own a MacBook Pro with a Pro or Max chip that can already drive two displays through a Thunderbolt dock.

Anker 565 USB-C Hub (11-in-1): The Hub to Check Against Your Laptop First

Anker Anker 565 (11-in-1)

  • Power passthrough: 85 W
  • Ethernet: Ethernet
  • USB data speed: 10 Gb/s

Best for: Single-monitor users wanting Ethernet, an SD reader and 10 Gb/s USB speeds.

Skip if: Skip if you need dual HDMI displays or more than 85W laptop charging.

Check price on Amazon

If you want a compact hub rather than a powered dock, keep one monitor on the hub most of the time, and only occasionally add a second screen through a Windows laptop's MST support, the Anker 565 is the small-footprint option on this list. It is a bus-powered hub, so it takes a 100W Power Delivery charger that you supply and passes up to 85W through to the laptop, and it adds a 10/100/1000 Mbps Ethernet port, a 3.5 mm headset jack and USB-A and USB-C ports that move data at up to 10 Gb/s.

The spec that decides this pick is 85W pass-through from a charger you already own, which keeps a 14-inch laptop charged without a second brick on the desk. Before you buy it for two monitors, confirm two things on Anker's own product page and in your laptop's manual: that the hub's video outputs match your monitors, and that your laptop's USB-C port supports DisplayPort Alt Mode with MST, since a hub like this cannot split a signal that the laptop does not send.

Owner reports are mixed, and they point at the laptop pairing. One X user said the Anker 565 worked without fuss as a docking station for an HP OmniBook 7 and a Samsung S25 Ultra after they tested both. One Reddit user in r/UsbCHardware had the same display fault across three different laptops with this hub, only ever through its HDMI port, and planned to replace the hub. Another in the same thread saw the problem even when powering the hub from an Anker 737 charger that can deliver 100W to one device, which suggests the fault was not a weak charger. In r/SteamDeck, an owner found that variable refresh rate would not work through the hub to an LG C3 television when every other device managed it, and a second owner was still asking for a fix more than a year later.

The honest downside follows from those reports: a bus-powered hub depends on the laptop's port and the charger behind it, so it is less predictable across machines than a dock with its own power supply. There is also no charger in the box.

Against the Plugable UD-MSTH2, the Anker 565 passes through more power at 85W against 65W and matches its 10 Gb/s USB speed, but the Plugable has a confirmed HDMI 2.0 output. Pick the Anker 565 if you already own a 100W USB-C charger and travel with the hub; pick the Plugable if the hub will live on one desk and two screens are the whole point.

Skip It If: two extended monitors are a must on day one and you have not confirmed your laptop's MST support, or if you want a dock that charges your laptop without buying a separate 100W charger.

What to Look for in a Dual-Monitor Hub

Match the hub to your laptop's video path before anything else. A Thunderbolt 4 or USB4 port can drive two displays through a dock like the TS4 or Revodok Max 213 on Windows and on Pro, Max and Ultra Macs.

Check the resolution and refresh rate at two screens, not one. Makers print the single-monitor maximum in large type; the two-monitor figure is lower and lives in the fine print. Read the dual-display line on the maker's page before you decide.

Look for a dock with its own power supply when two monitors are on the line. The Ugreen, for example, ships with its own 180W charger.

Count the ports that run at full speed. The TS4 runs every USB port at 10Gb/s, while the Anker 563 tops out at 5Gbps.

Read the warranty before the port list. Plugable lists lifetime support for the UD-MSTH2. One Reddit user in r/desksetup, after cycling through several no-name 16-in-2 docks that kept dropping one monitor whenever they re-docked a MacBook Pro, said they were ready to pay good money for one that did not break their workflow; a stated warranty is the cheapest filter against that experience.

Mistakes to Avoid

  • Buying the Anker 565 without a charger. It passes through up to 85W only when you connect a 100W Power Delivery charger that is not included, so without one your laptop drains while docked.
  • Expecting HDMI on the CalDigit TS4. No HDMI output is listed in its specs, so a pair of HDMI-only monitors means buying adapters before the first screen lights up.
  • Pairing the Anker 563 with a fast external SSD. Its USB data is capped at 5Gbps, so large backups crawl compared with the 10Gb/s ports on the TS4.
  • Trusting the Plugable UD-MSTH2 to charge a big laptop. Its pass-through stops at 65W, so a workstation that draws more will slowly lose charge during heavy work.
  • Relying on the Ugreen Revodok Max 213's Ethernet port without testing it. One long-term owner hit a DHCP problem through the dock's port on a Mac, so plug in wired networking inside your return window.
  • Skipping the host check on the Anker 563. The host device must support Power Delivery and DisplayPort Alt Mode, and a USB-C port without those gives you no video at all.
  • Not inspecting the Ugreen's front ports on arrival. One owner found the front USB-C and headphone jacks misaligned and had to request a replacement.

FAQs

Can a USB-C hub run two monitors on a MacBook Air?

It depends on the dock type. A DisplayLink dock such as the Anker 563 uses a software driver to add screens, and Anker's page says it can connect a laptop with up to 3 monitors. Check your Mac model's external display support before choosing a Thunderbolt or MST dock.

Which USB-C hub is best for dual monitors on Windows?

The Plugable UD-MSTH2 is the simplest choice, with HDMI 2.0 output and no driver to install. Windows laptops with Thunderbolt 4 can step up to the CalDigit TS4 or Ugreen Revodok Max 213 for more ports and power.

Does the CalDigit TS4 have an HDMI port?

No. No HDMI output is listed in the TS4's specs, so an HDMI monitor needs a separate adapter. Check the adapter type on CalDigit's product page before buying.

How much power does a dual-monitor dock need to charge a laptop?

Between 65W and 100W across these picks: the Plugable delivers 65W, the Anker 565 passes through 85W, the Ugreen charges the laptop at up to 90W, the TS4 delivers 98W and the Anker 563 up to 100W. A laptop that draws more than that will want its own power brick on the desk.

What is the difference between MST and DisplayLink?

MST splits one DisplayPort signal into two screens with no driver. DisplayLink uses a software driver; the Anker 563 uses it to connect a laptop with up to 3 monitors.

Is the Anker 565 good for two monitors?

It depends on your laptop. Reddit owners reported display faults with the Anker 565, one of them across three laptops. Confirm your laptop's video support and the hub's outputs on Anker's product page before buying it for two screens.

Do these docks come with a warranty?

Plugable lists lifetime support for the UD-MSTH2; no warranty term is on the sheet for these picks. Check the seller's warranty terms for the CalDigit, Ugreen and Anker picks before you buy, since terms vary by seller and region.

Can I run two high-refresh monitors from a USB-C dock?

Yes, with a Thunderbolt dock. One X owner runs two 1440p monitors at 165Hz through the CalDigit TS4 on an M3 MacBook, and the Ugreen Revodok Max 213 carries 40 Gbps over Thunderbolt. Confirm the dual-display figure on the maker's page for your monitors.

Why does my second monitor drop out when I re-dock my laptop?

Use a certified cable and update dock firmware first.

How These Hubs Were Chosen

Every product here was confirmed on its maker's own site for the specs that decide a dual-monitor setup, then checked against what owners report on Reddit and X, with no hands-on testing claimed. The OWC Thunderbolt Go Dock, Anker 553, Anker 341, Anker 332 and Satechi USB-C Pro Hub Slim were left out because their specs could not be confirmed on the manufacturer's page, and the Anker 555, Ugreen Revodok 105 and Ugreen Revodok 107 were left out because each has only one HDMI output and cannot run two monitors.