Office Consumer is reader-supported. We may earn an affiliate commission from qualified links on our site.

How to Do a 3-Way Call on RingCentral (w/Examples) + FAQs

Call the first person, click Add in the active call window, dial the second person, then click Merge when they answer. RingCentral's help center says this works in the desktop, web and mobile apps.

A three-way call on RingCentral is a merged call: you place the first caller on hold, dial a second person, and join the two calls together. RingCentral's help center says the apps let you add and manage up to eight additional participants on an active call, so a 3-way call is just the smallest version of that merge.

The stakes are small for a quick check-in but real for a sales close, a legal intake or a support escalation, where a dropped merge means calling everyone back. The steps differ between the app, the mobile app and a desk phone, and one admin setting decides whether you can hang up without ending the call for everyone.

This article reflects RingCentral's published help-center steps as of October 2026 and covers the RingEX product. Features change, so confirm current steps in your own app before you act.

  • 📞 The exact clicks for a 3-way call in the desktop and web app
  • 📱 How the Android and iOS apps handle Add, Hold & Answer and Merge
  • ☎️ Desk phone steps for Poly, Yealink and Cisco handsets
  • 🧑‍💼 The admin setting that lets a host leave without ending the call
  • ⚠️ The mistakes that drop callers and how to avoid each one

What a 3-Way Call on RingCentral Actually Is

A 3-way call on RingCentral is a merge of two live calls on your own line, not a dial-in conference bridge. RingCentral's help center on handling multiple calls says that when you make a new call while already on a call, your current call goes on hold, and once the new call is answered you can swap between them or merge them. The merge is what turns two separate calls into one conversation.

Three parties are involved: you as the host, the first caller and the person you add. The host owns the call. RingCentral's page on managing call participants says the first time you add a participant, the original caller is placed on hold; after they are merged, you can keep adding people and the others keep talking without being put on hold again. Only the host can remove a participant.

The limit matters when the "3-way" call grows. The same page says you can add and manage up to eight additional participants using the desktop, web and mobile apps. The desktop and web app also caps you at nine calls at the same time; RingCentral's help center says incoming calls after that limit follow your incoming call handling settings, and the app tells you when outgoing calls hit the limit.

The alternative is a true conference call with a dial-in number and access codes. RingCentral's page on managing conference calls says you start one from the New actions plus icon, and the popup shows a dial-in number, host and participant access codes, and an option to let participants join before the host. Use the merge for a quick three-person call and the bridge when people need to dial in on their own.

Which Situation Applies to You?

Pick your path by device and by whether the third person will call you or you will call them. The merge works the same way in spirit everywhere, but the button names and the gotchas differ. Here is how to choose.

Your situationBest path
You are at a computer and will dial the third personDesktop or web app: Add, dial, Merge
You are at a computer and the third person calls you mid-callDesktop or web app: Hold & Answer, then Merge
You are on the mobile app and will dial the third personMobile app: Add, dial, Merge
You are on the mobile app and the third person calls youMobile app: Hold & Answer (Android) or Hold & Accept (iOS), then Merge
You are on a Poly, Yealink or Cisco desk phoneConf soft key, dial, Conf again
People need to dial in on their own timeStart a conference call from the plus icon
You need to hang up while the others keep talkingAsk your admin to turn on the host-leave setting first

If the third person is in a RingCentral team chat with you, there is a shortcut. RingCentral's help center says you can open the group or team conversation, click the three-dot More icon, select Start conference call, and members click Join to connect.

Step-by-Step: How to Do a 3-Way Call on RingCentral

The whole process in the desktop or web app takes four steps. Each step below comes from RingCentral's help center on handling multiple calls and managing call participants. You need an active RingEX user account and the RingCentral app signed in.

  1. Place or answer the first call. This is a normal call in the app. Make sure the first caller knows you are about to bring someone in, because they will hear hold for a moment. Time: however long the first call takes to connect.

  2. Click Add in the active call window. RingCentral's help center says you can click Add in the call window or click the Keypad icon in the top right to open a new keypad. Type a name, extension or phone number, then click the contact or press Dial. Your first caller is now on hold. Time: a few seconds.

  3. Wait for the second person to answer. While you wait, the first caller hears hold music or silence. If the second person does not pick up, RingCentral's help center says to click End call, then click Unhold to rejoin the first caller.

  4. Click Merge. RingCentral's help center says you merge your current call with a call on hold by clicking the Merge icon in the top bar of the active call window, and if you have several calls on hold you pick which one from a dropdown. Click Merge again to confirm, and the app starts a conference with the current call and the selected on-hold call. Time: two clicks.

The second caller can also be someone who rings you. RingCentral's help center lists the options at the bottom of the call window when a call comes in during a call: End & Answer, Hold & Answer, To voicemail and Ignore. Choose Hold & Answer, talk to the new caller, then click Merge to join them to the call on hold.

Once merged, you can click the Participants icon to see everyone on the call. To remove someone, RingCentral's help center says you must be the host: click Participants, click the Remove participant icon next to the person, then click Remove to confirm. Repeat step 2 through step 4 to add more people, up to the limit of eight additional participants.

How to Leave Without Ending the Call

By default, hanging up as host ends the merged call for everyone, unless your admin turns on the host-leave setting. RingCentral's help center says that as host you can either end the conference or leave while the others keep talking, and that this feature is controlled by your account admin. When it is on, you click the end button, then pick Leave call or End call for everyone.

This trips up people coming from other phone systems. One Reddit user in r/RingCentral posted that a merged call ended for everyone when they dropped off, something they had relied on with their old provider. RingCentral's community support account replied that the feature exists but admins must enable the setting, and the poster later confirmed it worked as intended once it was on.

The consequence of skipping this is a dead line for your two callers. If you often hand a customer to a colleague and then leave, ask your admin to turn the setting on before you need it. Until then, use a warm transfer instead of a merge when you plan to drop off.

Three-Way Calls in the Mobile App

The mobile app follows the same Add, hold and Merge pattern, with slightly different button names on Android and iOS. RingCentral's help center on mobile call handling says the mobile app lets you make or receive a second call without ending the one you are on, and that further incoming calls follow your incoming call handling settings.

On Android, tap Add in the call window while on a call, then enter a name in the To field or tap the green Keypad icon to enter a number. If you entered a name, select the person and tap Next; if you entered a number, tap the green call button. The current call goes on hold. When a call comes in while you are already on one, RingCentral's help center lists Reply with Voice Message, End & Answer, To voicemail and Hold & Answer; tap Hold & Answer, then tap Merge to join the two calls for a three-way conversation.

On iOS, the steps match, with Hold & Accept in place of Hold & Answer and Swap to switch between calls. RingCentral's help center notes that depending on your iOS version and settings, the answer options may appear at the top of the screen and vary slightly. The fact that matters is the same: after Hold & Accept, tap Merge.

Before any of this works, the app needs its permissions. RingCentral's blog on conference calling from Android says that after installing the app from Google Play you must grant permissions for calling, contacts, notifications and your microphone so the app can function.

Three-Way Calls on a Desk Phone

On a RingCentral desk phone, the three-way call is a local conference started with the Conf soft key. The button sequence is nearly identical across the handsets RingCentral documents, but each has its own wrinkle.

On a Cisco 6821, RingCentral's setup guide says to press Conf while on a call, dial the second number, wait until the other person picks up, then press Conf again. The same page notes you can place up to two calls on hold, one per line, and switch between them with the Line keys.

On a Polycom 321 or 335, RingCentral's conference call page says to call the first party, press the Conf soft key (which puts the active call on hold), call the second party, and press Conf again when they answer; the screen should show Active:Conference. The page also describes a Join soft key for when you already have one call active and one on hold: arrow down to the held call and press Join. It warns not to press the conference key in that case, because it will ask for a new number to dial instead of joining the calls.

The Polycom page adds two behaviors worth knowing. Pressing hold places all parties in the conference on hold, and pressing Split breaks the conference into two separate held calls you can rejoin later with Join. When you end the call, the page says the first and second party stay in the conference and are not disconnected, which is the opposite of the app's default.

Yealink phones support conference calls. RingCentral's Yealink page says you can mute, transfer or set up conference calls on the handset, and that for a warm transfer you press Transfer, enter the number or pick a Directory contact, press OK or Send, and wait for an answer. If your model's soft keys are labeled differently, RingCentral's help center says admins can customize the deskphone key layout, so ask for a Conf key if you use the feature often.

Starting a Dial-In Conference Instead

When the third person should dial in on their own, start a conference call rather than merging. RingCentral's help center on managing conference calls says to click the New actions plus icon at the upper right of the app and select Start a conference call. The Conference call popup shows the dial-in number, an option to include additional dial-in numbers for people in other countries, the host and participant access codes, and a toggle to allow participants to join before the host.

Invitations go out from the same popup. RingCentral's help center says you open the Invite dropdown and choose Invite by Email or Invite by Message, enter names or email addresses, click Send, then click Start conference. On Android, RingCentral's blog says the same flow runs from the "+" icon, with Invite participants to send the details and Start conference to begin, and that you can add more attendees afterward by inviting them.

The host-leave caveat applies here too. RingCentral's help center notes at the top of the conference page that admins need to turn on a setting to allow hosts to leave conference calls before they end. If your meetings regularly run on after you drop, get that setting turned on once and forget about it.

Worked Example: Counting Calls and Participants

A receptionist with three callers can merge them all and still have room, because the limits are eight additional participants and nine simultaneous calls. Here is the arithmetic, using the figures from RingCentral's help center.

Start with one active call: the receptionist plus caller A, which is 1 + 1 = 2 people on the line. The receptionist clicks Add and dials caller B; caller A goes on hold, so the receptionist now has 2 active calls, within the desktop limit of 9 simultaneous calls. Caller B answers and the receptionist clicks Merge: 2 people + 1 = 3 people, a three-way call.

Now a colleague C needs to join. The receptionist clicks Add again, dials C, and clicks Merge when C answers: 3 + 1 = 4 people on the call, with 2 added participants used out of the 8 allowed, leaving 8 − 2 = 6 more slots.

The time cost is what matters to the callers. Caller A waits on hold during the dial and ring for B, and nobody waits again for C, because RingCentral's help center says that after the first merge, adding more participants does not put the others on hold.

Scenario Tables From Real Reader Situations

Three-way call problems often come up in situations like a busy front desk, a sales hand-off and a host who needs to leave. The tables below map each to the right move.

Front Desk Juggling Several Calls

What happensWhat to do
A second call rings while you are on oneChoose Hold & Answer, not End & Answer, if you may need both
Caller wants to speak with someone else tooClick Add, dial the colleague, click Merge
Colleague does not answerClick End call, then Unhold to return to the caller
You hit nine calls at once in the desktop appNew calls follow your incoming call handling settings

One Reddit user in r/RingCentral who works reception at a law firm described being the only person on duty during ad campaigns and wanting a way to hold new callers without interrupting the current one. Commenters pointed her to call queues and an IVR menu rather than manual merging; her experience is a reminder that merging is for bringing people together, not for parking them.

Sales or Account Hand-Off

What happensWhat to do
You want to introduce a specialist and stay onMerge, then stay as host
You want to introduce a specialist and leaveUse a warm transfer, or have the host-leave setting turned on
Prospect is on a desk phone, you are on the appMerge works the same; the device on the other end does not matter
You need a record of who joinedClick Participants during the call to see the list

Host Needs to Leave Early

What happensWhat to do
Host-leave setting is offHanging up ends the call for everyone
Host-leave setting is onClick end, choose Leave call
You are on a Polycom 321/335Ending leaves the other two in the conference
You are on a Cisco 6821Follow the on-screen options; check with your admin before relying on it

Three People, Three Ways to Do It

Each example below shows a verified RingCentral behavior in a plain work situation.

Dana runs the front desk at a small insurance agency and uses the desktop app. A policyholder calls about a claim and asks for the adjuster. Dana clicks Add, types the adjuster's extension, and the policyholder goes on hold. The adjuster answers, Dana clicks Merge and confirms, and all three are talking. When the adjuster has what he needs, Dana clicks the end button and chooses Leave call; this only works because her admin turned on the host-leave setting the week before.

Marcus is a field technician who lives in the Android app. A customer calls while he is already talking to a parts supplier. Marcus taps Hold & Answer, hears the customer's question, then taps Merge so the supplier can give the lead time directly. He later notices the app asked for microphone permission the first time he installed it; without that permission, RingCentral's blog says the app cannot function correctly, which explains a silent call he had the month before.

Priya is a paralegal on a Cisco 6821 desk phone. Her attorney asks her to get the opposing counsel's office on the line with them. She presses Conf, dials the number, waits for the receptionist to pick up, and presses Conf again; the three are connected.

Mistakes to Avoid

Seven mistakes can drop or botch a three-way call on RingCentral.

  1. Clicking End & Answer instead of Hold & Answer. The consequence is that your first caller is gone and you have to call back.
  2. Hanging up as host without the host-leave setting on. RingCentral's help center says the setting is controlled by your admin; without it, the call ends for everyone.
  3. Pressing Conf on a Polycom when you already have a held call. RingCentral's Polycom page says it asks for a new number instead of joining; use Join.
  4. Forgetting the first caller is on hold. Until the first merge, the original caller is on hold, so dial the second person quickly.
  5. Skipping the microphone permission on mobile. RingCentral's blog says the app needs calling, contacts, notifications and microphone permissions to function.
  6. Expecting a merged call to grow past eight added people. RingCentral's help center sets the limit at eight additional participants; start a dial-in conference for bigger groups.
  7. Running past nine simultaneous calls in the desktop app. Extra incoming calls route by your call handling settings.

Merged Call Versus Conference Call

A merged call is faster to start, while a conference call is easier for people to join on their own. The table lays out the differences from RingCentral's help center.

FeatureMerged callConference call
How it startsAdd, then Merge from an active callNew actions plus icon, Start a conference call
Who dialsYou dial each personParticipants dial in with a code
Participant limitUp to eight additional participantsNot stated on the merge page; dial-in with access codes
Host leaves earlyRequires admin settingRequires admin setting
InvitationsNone neededInvite by Email or Invite by Message
Join before hostNot applicableToggle in the popup

Do's and Don'ts

Follow these habits and the three-way call becomes routine.

Do's:

  • Do tell the first caller you are putting them on hold for a moment.
  • Do use Hold & Answer when a second call comes in and you may want both.
  • Do click Participants after the merge to confirm everyone connected.
  • Do ask your admin to turn on the host-leave setting before you need it.
  • Do keep Unhold in mind when the second person does not answer.

Don'ts:

  • Don't press Conf on a Polycom when the right key is Join.
  • Don't hang up as host assuming the others will stay connected.
  • Don't leave a caller on hold while you look up a number; find it first.
  • Don't expect a merged call to replace a dial-in conference for large groups.
  • Don't ignore the microphone permission prompt on a new phone.

Pros and Cons of Merging Calls on RingCentral

Merging is the right tool for quick three-person conversations and the wrong one for big or long meetings.

Pros:

  • No setup: it starts from any live call with Add and Merge.
  • Works across desktop, web, Android, iOS and desk phones.
  • Adding a third or fourth person does not put the others back on hold.
  • The host can view and remove participants during the call.
  • The same Add and Merge pattern repeats for every added person.

Cons:

  • The first caller waits on hold until the first merge.
  • Hanging up ends the call for everyone unless an admin enables host-leave.
  • The limit of eight additional participants caps the group.
  • Desk phone key behavior differs by model, which confuses new users.
  • There is no dial-in code, so late joiners must be dialed by you.

What to Do Next

  1. Open the RingCentral app and confirm you can see Add in an active call window.
  2. On mobile, check that calling, contacts, notifications and microphone permissions are granted.
  3. Ask your admin whether the host-leave setting is on for your account.
  4. Practice once with a colleague: call, Add, dial, Merge, then Participants.
  5. If you use a desk phone, find your model's Conf or Join key and read RingCentral's page for it.
  6. For groups that need to dial in, start a conference call from the plus icon and send invites.

FAQs

Can You Do a 3-Way Call on RingCentral?

Yes. In 2026, RingCentral's help center says you can merge an active call with a call on hold in the desktop, web and mobile apps, and desk phones use a Conf or Join key to do the same.

How Do You Merge Calls in the RingCentral Desktop App?

Click Add, dial the second person, then click Merge. RingCentral's help center says the Merge icon sits in the top bar of the active call window, with a dropdown to pick which held call to merge if you have several.

How Many People Can Be on a Merged RingCentral Call?

Up to eight additional participants. RingCentral's help center says you can add and manage up to eight additional people on an active call using the desktop, web and mobile apps as of 2026.

Can the Host Leave a RingCentral Conference Without Ending It?

Yes, if an admin turns on the setting. RingCentral's help center says the host-leave feature is controlled by your account admin; once on, you can choose Leave call or End call for everyone.

What Happens If the Second Person Does Not Answer?

Click End call, then Unhold. RingCentral's help center says this returns you to the first caller, who was placed on hold when you dialed the second person.

How Do You Do a 3-Way Call on a Cisco Desk Phone With RingCentral?

Press Conf, dial, then press Conf again. RingCentral's Cisco 6821 guide says to press Conf while on a call, dial the second number, wait for an answer, then press Conf again to join everyone.

How Do You Merge Calls on the RingCentral Android App?

Tap Hold & Answer or Add, then tap Merge. RingCentral's help center says Merge joins the new call with the previous call for a three-way conversation; tapping the other person's name switches calls instead.

How Do You Merge Calls on the RingCentral iOS App?

Tap Hold & Accept, then tap Merge. RingCentral's help center says Swap switches between calls and that the answer options may appear at the top of the screen depending on your iOS version.

Is a Merged Call the Same as a RingCentral Conference Call?

No. A merged call joins calls you dialed from your own line, while RingCentral's help center says a conference call started from the plus icon gives participants a dial-in number and access codes.

How Many Calls Can You Have at Once in the RingCentral Desktop App?

Nine. RingCentral's help center says you can be on up to nine calls at the same time in the desktop and web app, and later incoming calls follow your incoming call handling settings.

Can You Remove Someone From a Merged RingCentral Call?

Yes, if you are the host. RingCentral's help center says to click the Participants icon, click Remove participant next to the person, then click Remove to confirm.